Class I, Division 2, ATEX, and IECEx for Atmospheres with Potentially Explosive Gases

With our UL Class I, Division 2, ATEX certificate, and IECEx certificate from UL, Stat-X® EX electric operated aerosol fire suppression units are now certified to be in enclosed environments classified as a hazardous area.

Stat-X® EX electric operated aerosol fire suppression units have attained the UL Listing for use as a total flooding system in hazardous areas classified as Class I, Division 2 in accordance with UL category code FZED and FZED7.

These units are certified by UL and are authorized to bear the UL listing mark for Canada and the United States, Class I, Division 2, as well as IECEx, and the ATEX mark.

This product line of Stat-X EX electrical model aerosol fire suppression units complement, but do not supersede, our current line of UL/ULC listed E-model Stat-X aerosol fire suppression units. The final product is fitted with a choice of factory installed 3/4” NPT or M25x1.5mm male stainless steel or brass 90˚ elbow threaded connections.

Stat-X® and Stat-X First Responder® are registered trademarks. The Stat-X brand is sold worldwide exclusively by Fireaway Inc. under license from R-Amtech International, Inc.

Stat-X Features:

• UL Listed for Occupied Spaces

• Performance
Highly effective based on required density

• Compact and Modular
Offering adaptable design especially when space and weight are critical

• Simple and Economic Installation
No expensive labor-intensive piping is required

• Durable
Ideal for harsh environments and remote locations

• Long service life
Service life of ten (10) years

• Virtually Maintenance Free

• Environmentally Friendly
EPA SNAP Listed for unoccupied and occupied spaces
Zero Global Warming potential and Zero Ozone Depletion potential

• Made in the USA

Made in USA

Available in the following sizes (see specifications for more details):

  • 30E (.03 kg aerosol mass)
  • 60E and 60E long (.06 kg aerosol mass)
  • 100E (.10 kg aerosol mass)
  • 250E  (.25 kg aerosol mass)
  • 500E (.50 kg aerosol mass)
  • 1000E  (1.00 kg aerosol mass)
  • 1500E (1.50 kg aerosol mass)
  • 2500E (2.50 kg aerosol mass)



Upon detection of a fire, Stat-X EX generators will be activated automatically from a suitable listed releasing device. All auxiliary system components (release panel, detection, remote pull stations, etc.) are listed/approved by UL, ULC, FM, New York City MEA, and California State Fire Marshall.

Upon activation, the generators produce an exceptionally effective, ultra-fine, potassium based aerosol. Unlike gaseous systems, Stat-X EX aerosol generators are cost effective to install and maintain — as they do not require the pressure vessels, piping, or expensive installation costs associated with other extinguishing systems.

Space and weight requirements are minimal. On an agent weight basis, Stat-X EX aerosol is ten (10) times more effective than gaseous agent alternatives.

The Stat-X EX generator’s effectiveness is a function of its patented design, aerosol composition, and ultra-fine particle size. Fire suppression is rapidly achieved through interference between the ultra-fine aerosol particulate and the flame’s free radicals — terminating propagation of the fire.

Stat-X EX aerosol generators are virtually maintenance free and have a service life of over ten (10) years. This, coupled to their low installation cost, makes them an extremely cost-effective fire protection solution.

Agent Container. The generator housing is constructed of exterior and interior stainless steel shells separated by an insulating material. The top and bottom of housing is stainless steel and incorporate a 3/4″ NPT fitting to enable direct connection to conduit. The housing is sealed with a non-permeable membrane and shall incorporate a mechanical means to ensure rupture of the membrane

Finish. Brushed stainless steel. Units have passed salt spray corrosion testing per UL Standard 2127 as part of their listing.

Connection Fitting. Our electrical generator is fitted with a choice of factory installed 3/4” NPT or M25x1.5mm male stainless steel or brass 90˚ elbow threaded connections.

Aerosol Agent. Aerosol generated is a potassium based and manufacturer provides a fifteen (15) minute time weighted average data from an independent United States laboratory demonstrating that the aerosol does not produce (at normal design concentrations) harmful levels of CO, CO2, and NOx based on NIOSH standards. It has no ozone depletion potential and no global warming potential. The agent is approved for commercial sale by the US EPA.

Listing. Aerosol generators are listed by Underwriter’s Laboratories of Canada to UL Standard 2127 or equivalent.

System. Extinguishing system is accomplished by means of distributed generating devices to ensure distribution of extinguishing aerosol throughout the protected volume. Devices are capable of being supervised.

Mounting. Generator devices shall be mounted by means of stainless steel bracketing that allows for directional adjustment through both vertical and horizontal plane.

Operation/Storage Parameters:

  • Temperature -40° C to +54° C (-40° F to +130° F)
  • Relative Humidity up to 98{c0800b06ac212de69cfc05ac3a21173968e58200577490a0cd190f48e00a292d} at +35° C (+95° F)

Transportation Classification:

  • For shipment by motor vehicle, rail, or cargo vessel:  Special Permit 20600, UN3268, Class 9, Proper Shipping Name: Safety Devices
  • For shipment by air (cargo or passenger): UN0432, Class 1.4S, Proper Shipping Name: Article, Pyrotechnic for Technical Purposes
  • Shipping Limitations:
    — Ground: None
    — Max. weight per unit packaging — Cargo Air 100 kgs (220 lbs)
    — Max. weight per unit packaging — Passenger Air 25 kgs (55 lbs)

Stat X