Having a team of expert engineers and drafters on board, we are capable of offering the full engineering support not only during scoping study, and detailed design but also through construction, commissioning and start up and retrofitting activities. Our list of services includes but limited to:

Detailed Engineering Design

Sprinkler Systems (Dry, Wet, Pre Action, Deluge and Foam-Water) Design

  • Detailed Hydraulic Calculations
  • Determining the System Specification
  • Detailed Engineering drawings
  • Comprehensive Code Compliance Review for new and existing sprinkler systems – With our extensive knowledge of codes & standards, we can guarantee that our designs fully comply with NFPA Codes as well national and provincial building and fire codes
  • Stand Pipe Hose Station Systems Design
  • Fire Water Pumps Selection and Sizing
    • Data Sheet preparation
    • NPSH Calculations
    • If required, design of the fire water tank
  • Fire Water Piping Selection and Line Sizing
    • Detailed Hydraulic Calculations
    • PFDs, P&IDs and heat & material balances development
    • Line Designation Tables
  • Commissioning & start up support:
  • Underground Fire Water piping flush , Fire Hydrant Flow test and acceptance test for Sprinkler systems
    • Preparation of test plan to clearly define the pass/fail criteria for technicians to perform tests as per the required NFPA codes
    • Analyzing the result of flow tests & Issuing the test reports for clients
    • Acting as the Engineer of Record for verification of the newly installed systems
    • Collaboration with building owners to issue the building occupancy permits
  • Code Consulting Services for Retrofitting Systems
  • Inspecting existing facilities to verify that the fire water system comply with the required codes

Detailed Engineering Design